Wednesday, February 28, 2007

Human factors/ergonomics research can help workers avoid carpal tunnel syndrome

Guidelines for designing equipment to avoid CTS ...

"In work involving the hands, whether using a computer or a hammer, the wrist is a vulnerable spot. Repeated or sustained bending and flexing can lead to carpal tunnel syndrome (CTS).

A group of human factors/ergonomics (HF/E) researchers from the University of California at San Francisco and McMaster University in Ontario, Canada, have conducted the first study that systematically identifies how one contributor to CTS – carpal tunnel pressure – can be examined in detail to establish limits on how much a wrist can be flexed before nerve damage sets in. The researchers believe their findings could be used to create simple guidelines to help workers avoid wrist postures that are likely to cause nerve trauma. The findings from their study appear in a paper in the February issue of Human Factors: The Journal of the Human Factors and Ergonomics Society.

The research team studied the pressure that is placed on the nerve in the carpal tunnel in various wrist postures in 37 healthy men and women between the ages of 22 and 50. Wrist postures that are not neutral (that is, bent or flexed) cause increased pressure on the nerve. The researchers concluded that when sustained pressure on the carpal tunnel reaches 30 mmHG, injury is likely to occur.

In order to keep pressure below 30 mmHG, it is recommended that sustained wrist extension (bending the hand back) should not exceed 32.7 degrees, wrist flexion (bending the wrist toward the palm) should not exceed 48.6 degrees, ulnar deviation (sideways toward the small finger) should not exceed 14.5 degrees, and radial deviation (sideways toward the thumb) should not exceed 21.8 degrees.

The researchers believe that a set of guidelines could be developed from their data – guidelines that could, if applied by engineers and designers during the design of work and tools, protect workers. Such guidelines could also be used to identify tasks that may put workers at risk for developing or aggravating CTS."    (Continued via Eureka Alert)    [Ergonomics Resources]

Listen to this article

0 Comments:

Post a Comment

Home

Home
.